-
Lýsing vöru
Liquid Polybase – Rigid Semi-Permanent Base for Extensions and Modeling (Medium Viscosity) TPO Free
Liquid Polybase is a builder semi-permanent nail polish with an extremely strong structure and low flexibility (rigid). Due to its medium viscosity and post-polymerization hardness, it behaves similarly to a builder gel, allowing for small to medium extensions on templates, as well as apex formation. Being a rigid base, it perfectly supports filing for finishing the architecture, making it the ideal solution for strengthening very fragile natural nails.
Solutions for Common Salon Challenges Broken corners / Need for extensions: Unlike classic rubber bases (which are too elastic to support an extension), Polybase has the necessary rigidity to extend the nail on a template (small/medium extensions), saving the manicure without switching to a classic gel system.
Thin, "paper-like" natural nails: Its reduced flexibility provides a hard "shield" over the natural nail, preventing bending and breaking from mechanical shocks.
Difficult filing of gummy bases: Thanks to its strong polymer structure, Polybase does not clog the e-file and allows for precise filing, exactly like a hard gel, making it perfect for correcting architecture.
Lifting of hard materials: By following the correct adhesion protocol (with a flexible base underneath), it prevents any form of lifting at the cuticle level.
Main Characteristics Medium Viscosity: Leveling is controlled. It does not flow into the folds, giving the technician the necessary time to model the apex or the extension on the template.
Hybrid Product (Strong Structure): Combines the speed of bottle application (specific to semi-permanent polishes) with the durability and resistance of a builder gel.
Excellent Pigmentation: Formulated with high-quality cosmetic pigments, it evens out the nail bed and covers imperfections in a single modeling layer.
Instructions for Use
Because Liquid Polybase is a hard/rigid material, it requires a "shock absorber" between it and the natural nail to prevent lifting.
Mechanical Preparation: Finely matte the nail and remove dust. Chemical Preparation: Apply Nail Prep (dehydrator) and Bonder (acid-free primer). Allow to air dry.
Adhesion Layer (Critical Step): Apply a transparent base coat (we recommend Liquid Base or Rubber Base Clear), brushed very thin and massaged into the nail plate. Polymerize completely.
Modeling / Extension: Mount the template (if applicable) and create the extension or build the apex using Liquid Polybase.
Finishing: Due to its structure, the material can be degreased and filed to achieve the perfect shape.
Pro Tip: Because Polybase creates a very tight polymer network (to offer that strong structure), it releases heat during polymerization (heat spike), especially when applied in a modeling layer (apex). Use the Low Heat Mode function of your lamp or instruct the client to remove her hand for 3-5 seconds at the first signs of heating, then reintroduce.
Technical Specifications Volume: 13 ml Flexibility: Low (Rigid / Hard)
Viscosity: Medium
Polymerization Time: LED Lamp: 90 seconds UV Lamp: 90 - 120 seconds
Ingredients (INCI) Acrylates Copolymer, Hydroxypropyl Methacrylate, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone. May contain: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742. The use of the modern photoinitiator Ethyl Trimethylbenzoyl Phenylphosphinate ensures fast and complete polymerization in depth while respecting modern safety standards (TPO Free), protecting against skin sensitization.
Lýsing vöru
Liquid Polybase – Rigid Semi-Permanent Base for Extensions and Modeling (Medium Viscosity) TPO Free
Liquid Polybase is a builder semi-permanent nail polish with an extremely strong structure and low flexibility (rigid). Due to its medium viscosity and post-polymerization hardness, it behaves similarly to a builder gel, allowing for small to medium extensions on templates, as well as apex formation. Being a rigid base, it perfectly supports filing for finishing the architecture, making it the ideal solution for strengthening very fragile natural nails.
Solutions for Common Salon Challenges Broken corners / Need for extensions: Unlike classic rubber bases (which are too elastic to support an extension), Polybase has the necessary rigidity to extend the nail on a template (small/medium extensions), saving the manicure without switching to a classic gel system.
Thin, "paper-like" natural nails: Its reduced flexibility provides a hard "shield" over the natural nail, preventing bending and breaking from mechanical shocks.
Difficult filing of gummy bases: Thanks to its strong polymer structure, Polybase does not clog the e-file and allows for precise filing, exactly like a hard gel, making it perfect for correcting architecture.
Lifting of hard materials: By following the correct adhesion protocol (with a flexible base underneath), it prevents any form of lifting at the cuticle level.
Main Characteristics Medium Viscosity: Leveling is controlled. It does not flow into the folds, giving the technician the necessary time to model the apex or the extension on the template.
Hybrid Product (Strong Structure): Combines the speed of bottle application (specific to semi-permanent polishes) with the durability and resistance of a builder gel.
Excellent Pigmentation: Formulated with high-quality cosmetic pigments, it evens out the nail bed and covers imperfections in a single modeling layer.
Instructions for Use
Because Liquid Polybase is a hard/rigid material, it requires a "shock absorber" between it and the natural nail to prevent lifting.
Mechanical Preparation: Finely matte the nail and remove dust. Chemical Preparation: Apply Nail Prep (dehydrator) and Bonder (acid-free primer). Allow to air dry.
Adhesion Layer (Critical Step): Apply a transparent base coat (we recommend Liquid Base or Rubber Base Clear), brushed very thin and massaged into the nail plate. Polymerize completely.
Modeling / Extension: Mount the template (if applicable) and create the extension or build the apex using Liquid Polybase.
Finishing: Due to its structure, the material can be degreased and filed to achieve the perfect shape.
Pro Tip: Because Polybase creates a very tight polymer network (to offer that strong structure), it releases heat during polymerization (heat spike), especially when applied in a modeling layer (apex). Use the Low Heat Mode function of your lamp or instruct the client to remove her hand for 3-5 seconds at the first signs of heating, then reintroduce.
Technical Specifications Volume: 13 ml Flexibility: Low (Rigid / Hard)
Viscosity: Medium
Polymerization Time: LED Lamp: 90 seconds UV Lamp: 90 - 120 seconds
Ingredients (INCI) Acrylates Copolymer, Hydroxypropyl Methacrylate, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone. May contain: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742. The use of the modern photoinitiator Ethyl Trimethylbenzoyl Phenylphosphinate ensures fast and complete polymerization in depth while respecting modern safety standards (TPO Free), protecting against skin sensitization.