Frí heimsending þegar þú pantar fyrir 25.000 kr. eða meira

Karfan þín

DARK Stamping Polish №42 Taupe STICKY, 10 ml

Venjulegt verð 1,090 kr
Verð per stk.
per 
 
Virðisaukaskattur innifalinn.

Frí heimsending þegar þú pantar fyrir 20.000 kr. eða meira

Fáðu sent samdægurs eða næsta daga með Dropp

Ertu með spurningar - hafðu samband hér

Öruggar greiðslu með Teya

    • Lýsing vöru

      STAMPING POLISH DARK are stamping polishes that transfer easily when used correctly. They offer a wide palette and rich pigmentation. The consistency is not thick and they are compatible with all types of stamping plates.

      Application method

      • Perform a manicure and apply a base/gel or color, cure under a lamp;
      • If there is a sticky layer, remove it with DARK GEL CLEANSER;
      • Apply the polish to the stamping plate, scrape off the excess with a scraper, and transfer the design onto the stamp;
      • Transfer the design from the stamp to the nail with a rolling or straight motion;
      • Apply top coat (if the top coat runs off the design, apply a thin layer of clear base first, then top coat).


      Why a design may not transfer properly to the stamp

      1. The polish should not be too thickened; make sure to load your brush with enough polish to cover the design;
      2. Apply polish to the plate in 1-2 strokes. Longer application increases drying time in the air, reducing transfer quality;
      3. Scrape at a 45-degree angle without pressing, so as not to push the polish out of the design;
      4. Work quickly with the scraper (2-4 passes are enough); avoid large sweeping movements across the plate;
      5. Quickly set down the scraper and pick up the stamp (remember, time is critical for polish stamping);
      6. Transfer the design with a gentle rolling motion. DO NOT press the stamp hard onto the plate-as more pressure leaves more polish behind.


      Volume 10 ml.

      Important notes

      • Certified according to European and Ukrainian standards;
      • Product is registered in the CPNP system;
      • For professional use only;
      • All DARK products are not tested on animals;
      • Use original DARK lamps with all DARK materials;
      • Read the instructions carefully before use;
      • The color of the product in the photo may differ slightly from the actual product due to individual screen settings (brightness, contrast, color profile), lighting during photography, or technical aspects of digital color reproduction. We strive to present product colors as accurately as possible, but minor differences are possible.
      • The manufacturer may change the formulation of products to improve it. The most up-to-date ingredients list can always be found on the product packaging.
      • If you have allergies or individual intolerance to any components, do not use the product. In such cases, consult a doctor before use.


      Main ingredients Butyl Acetate, Ethyl Acetate, Acrylates Copolymer, Acetyl Tributyl Citrate.

    Lýsing vöru

    STAMPING POLISH DARK are stamping polishes that transfer easily when used correctly. They offer a wide palette and rich pigmentation. The consistency is not thick and they are compatible with all types of stamping plates.

    Application method

    • Perform a manicure and apply a base/gel or color, cure under a lamp;
    • If there is a sticky layer, remove it with DARK GEL CLEANSER;
    • Apply the polish to the stamping plate, scrape off the excess with a scraper, and transfer the design onto the stamp;
    • Transfer the design from the stamp to the nail with a rolling or straight motion;
    • Apply top coat (if the top coat runs off the design, apply a thin layer of clear base first, then top coat).


    Why a design may not transfer properly to the stamp

    1. The polish should not be too thickened; make sure to load your brush with enough polish to cover the design;
    2. Apply polish to the plate in 1-2 strokes. Longer application increases drying time in the air, reducing transfer quality;
    3. Scrape at a 45-degree angle without pressing, so as not to push the polish out of the design;
    4. Work quickly with the scraper (2-4 passes are enough); avoid large sweeping movements across the plate;
    5. Quickly set down the scraper and pick up the stamp (remember, time is critical for polish stamping);
    6. Transfer the design with a gentle rolling motion. DO NOT press the stamp hard onto the plate-as more pressure leaves more polish behind.


    Volume 10 ml.

    Important notes

    • Certified according to European and Ukrainian standards;
    • Product is registered in the CPNP system;
    • For professional use only;
    • All DARK products are not tested on animals;
    • Use original DARK lamps with all DARK materials;
    • Read the instructions carefully before use;
    • The color of the product in the photo may differ slightly from the actual product due to individual screen settings (brightness, contrast, color profile), lighting during photography, or technical aspects of digital color reproduction. We strive to present product colors as accurately as possible, but minor differences are possible.
    • The manufacturer may change the formulation of products to improve it. The most up-to-date ingredients list can always be found on the product packaging.
    • If you have allergies or individual intolerance to any components, do not use the product. In such cases, consult a doctor before use.


    Main ingredients Butyl Acetate, Ethyl Acetate, Acrylates Copolymer, Acetyl Tributyl Citrate.

    App section